In summer, the temperature rises in various places, and many laser equipment will generate heat during use, which will cause some failures. Therefore, in order to avoid the failure of the laser cutting machine in the summer, everyone must pay attention to the maintenance and repair of the laser cutting machine, which can extend the service life of the machine.

In the sweltering summer, Datu Laser reminds you that whether you are going out for fun or working outdoors, you must take good measures to prevent heatstroke. We must not only prepare for heatstroke prevention and cooling, but also do maintenance for the laser cutting machine to prevent the machine from "heatstroke"

Water cooling

In hot weather, the deterioration rate of the cooling water will also increase. It is recommended that users of the laser cutting machine use regular distilled or pure water and clean up the scale regularly to avoid the adhesion of scale in the laser and pipes that affects the laser power; pay attention to the temperature of the cooling water not to differ from the air temperature Too big. As the summer temperature gets higher and higher, the working pressure of the cooling system of the laser cutting machine increases sharply. It is recommended to check and maintain the internal pressure of the cooler before the high temperature comes, and adjust it to adapt to the high temperature in time.

lubricating

The guide rails should be cleaned frequently to remove dust and other debris to ensure that the laser equipment is normal. The rack should be wiped frequently and lubricated. The time should be adjusted to shorten the time by 0.5-1 times compared with the spring and autumn season, and keep observation Oil condition. For machinery working in high-temperature areas, appropriately increase the viscosity level of the oil, and the temperature of the fat oil is easy to change. Add oil appropriately to ensure lubrication without debris. Carefully check the cutting table of the laser cutting machine and the straightness of the track and the verticality of the machine, and if it is found to be abnormal, it will be maintained and debugged in time. The guide rail should be cleaned and lubricated frequently, and the motor should be cleaned and lubricated frequently to keep the machine in the best condition at all times. The machine can move better during operation, and cut more accurately. The product quality will be higher.

line

Check and replace the aging wires, plugs, hoses, and connectors; check whether the connector pins of the electrical components are loose, and tighten them in time to avoid poor contact causing electrical appliances to burn out and signal transmission unstable.

Tips

Note: Beware of the frosting of the laser machine. Because the temperature of the chiller and the ambient temperature are quite different, the laser and the cutting head will be frosted, which will cause the equipment and the lens to be damaged. Please increase the temperature of the water chiller. Please contact us if you will not adjust it. After-sales ask how to adjust.

Sharpen the knife without accidentally cutting wood, and even the most powerful machine needs maintenance. Therefore, when the hot summer comes, protect your "love machine" and stay in the best condition at all times to bring you greater benefits.